升级我的网络连接（adsl到vdsl）后我甚至无法浏览谷歌..为什么？
最近我们将家庭adsl（24mbps）连接升级到vdsl（50mbps / VDSL2 17a配置文件），因为差不多第1天我甚至无法打开谷歌页面……
（1）Wifi始终显示连接，有时我得到响应并且可以浏览但仅限于非常小的时间。
（2）我在升级之前添加的Torrent似乎全速工作！
（3）我在华硕fx502vm笔记本电脑上使用双windows10 / ubuntu启动设置。 Windows 10完全没有速度/连接问题..
（4）我甚至尝试使用不同的调制解调器/路由器（用tp-link archer vr2800替换便宜的technicolor）
附上来自wireless_info脚本的常用信息花絮：
########## wireless info START ########## Report from: 05 Jul 2018 00:34 EEST +0300 Booted last: 05 Jul 2018 00:00 EEST +0300 Script from: 10 Jan 2018 20:04 UTC +0000 ##### release ########################### Distributor ID: Ubuntu Description: Ubuntu 16.04.4 LTS Release: 16.04 Codename: xenial ##### kernel ############################ Linux 4.15.0-24-generic #26~16.04.1-Ubuntu SMP Fri Jun 15 14:35:08 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux Parameters: ro, quiet, splash, vt.handoff=7 ##### desktop ########################### Ubuntu ##### lspci ############################# 02:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a) Subsystem: Intel Corporation Dual Band Wireless-AC 8260 [8086:0010] Kernel driver in use: iwlwifi 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10) Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f] Kernel driver in use: r8169 ##### lsusb ############################# Bus 002 Device 003: ID 0bda:0411 Realtek Semiconductor Corp. Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 009: ID 8087:0a2b Intel Corp. Bus 001 Device 007: ID 0b05:1837 ASUSTek Computer, Inc. Bus 001 Device 005: ID 07ca:1871 AVerMedia Technologies, Inc. Bus 001 Device 003: ID 13d3:5666 IMC Networks Bus 001 Device 011: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 010: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 008: ID 045e:02fe Microsoft Corp. Bus 001 Device 006: ID 2516:0011 Bus 001 Device 004: ID 0bda:5411 Realtek Semiconductor Corp. Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA card info ################## ##### rfkill ############################ 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### lsmod ############################# asus_nb_wmi 28672 0 asus_wmi 28672 1 asus_nb_wmi sparse_keymap 16384 1 asus_wmi iwlmvm 364544 0 mac80211 778240 1 iwlmvm iwlwifi 282624 1 iwlmvm cfg80211 622592 3 iwlmvm,iwlwifi,mac80211 wmi 24576 1 asus_wmi video 45056 1 asus_wmi ##### interfaces ######################## [/etc/network/interfaces] auto lo iface lo inet loopback ##### ifconfig ########################## enp3s0 Link encap:Ethernet HWaddr inet addr:192.168.1.55 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e7c:ffd3:89df:1d58/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:90 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:10592 (10.5 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1992 errors:0 dropped:0 overruns:0 frame:0 TX packets:1992 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:146099 (146.0 KB) TX bytes:146099 (146.0 KB) wlp2s0 Link encap:Ethernet HWaddr inet addr:192.168.1.182 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13782 errors:0 dropped:0 overruns:0 frame:0 TX packets:9046 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16512534 (16.5 MB) TX bytes:1570067 (1.5 MB) ##### iwconfig ########################## lo no wireless extensions. enp3s0 no wireless extensions. wlp2s0 IEEE 802.11 ESSID:"WIND_2.4G_3C6713" Mode:Managed Frequency:2.412 GHz Access Point: Bit Rate=52 Mb/s Tx-Power=22 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=31/70 Signal level=-79 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:36 Missed beacon:0 ##### route ############################# Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.254 0.0.0.0 UG 600 0 0 wlp2s0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 enp3s0 192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 enp3s0 192.168.1.0 0.0.0.0 255.255.255.0 U 600 0 0 wlp2s0 ##### resolv.conf ####################### nameserver 127.0.1.1 ##### network managers ################## Installed: NetworkManager Running: root 994 1 0 00:28 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon ##### NetworkManager info ############### GENERAL.DEVICE: enp3s0 GENERAL.TYPE: ethernet GENERAL.NM-TYPE: NMDeviceEthernet GENERAL.VENDOR: Realtek Semiconductor Co., Ltd. GENERAL.PRODUCT: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller GENERAL.DRIVER: r8169 GENERAL.DRIVER-VERSION: 2.3LK-NAPI GENERAL.FIRMWARE-VERSION: GENERAL.HWADDR: GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) GENERAL.REASON: 0 (No reason given) GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/net/enp3s0 GENERAL.IP-IFACE: enp3s0 GENERAL.IS-SOFTWARE: no GENERAL.NM-MANAGED: yes GENERAL.AUTOCONNECT: yes GENERAL.FIRMWARE-MISSING: no GENERAL.NM-PLUGIN-MISSING: no GENERAL.PHYS-PORT-ID: -- GENERAL.CONNECTION: Wired connection 1 GENERAL.CON-UUID: 22932a03-2a48-346f-8ff7-3794771ef931 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/0 GENERAL.METERED: no (guessed) CAPABILITIES.CARRIER-DETECT: yes CAPABILITIES.SPEED: 100 Mb/s CAPABILITIES.IS-SOFTWARE: no WIRED-PROPERTIES.CARRIER: on CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1} CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 22932a03-2a48-346f-8ff7-3794771ef931 | Wired connection 1 IP4.ADDRESS[1]: 192.168.1.55/24 IP4.GATEWAY: IP4.ROUTE[1]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000 IP6.ADDRESS[1]: fe80::4e7c:ffd3:89df:1d58/64 IP6.GATEWAY: GENERAL.DEVICE: wlp2s0 GENERAL.TYPE: wifi GENERAL.NM-TYPE: NMDeviceWifi GENERAL.VENDOR: Intel Corporation GENERAL.PRODUCT: Wireless 8260 (Dual Band Wireless-AC 8260) GENERAL.DRIVER: iwlwifi GENERAL.DRIVER-VERSION: 4.15.0-24-generic GENERAL.FIRMWARE-VERSION: 34.0.1 GENERAL.HWADDR: GENERAL.MTU: 0 GENERAL.STATE: 100 (connected) GENERAL.REASON: 0 (No reason given) GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/net/wlp2s0 GENERAL.IP-IFACE: wlp2s0 GENERAL.IS-SOFTWARE: no GENERAL.NM-MANAGED: yes GENERAL.AUTOCONNECT: yes GENERAL.FIRMWARE-MISSING: no GENERAL.NM-PLUGIN-MISSING: no GENERAL.PHYS-PORT-ID: -- GENERAL.CONNECTION: WIND_2.4G_3C6713 GENERAL.CON-UUID: c822c797-be2e-44a3-8507-c8c2082af6a2 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/3 GENERAL.METERED: no (guessed) CAPABILITIES.CARRIER-DETECT: no CAPABILITIES.SPEED: 52 Mb/s CAPABILITIES.IS-SOFTWARE: no WIFI-PROPERTIES.WEP: yes WIFI-PROPERTIES.WPA: yes WIFI-PROPERTIES.WPA2: yes WIFI-PROPERTIES.TKIP: yes WIFI-PROPERTIES.CCMP: yes WIFI-PROPERTIES.AP: yes WIFI-PROPERTIES.ADHOC: yes WIFI-PROPERTIES.2GHZ: yes WIFI-PROPERTIES.5GHZ: yes CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{0} CONNECTIONS.AVAILABLE-CONNECTIONS[1]: c822c797-be2e-44a3-8507-c8c2082af6a2 | WIND_2.4G_3C6713 IP4.ADDRESS[1]: 192.168.1.182/24 IP4.GATEWAY: 192.168.1.254 IP4.DNS[1]: 8.8.8.8 DHCP4.OPTION[1]: requested_subnet_mask = 1 DHCP4.OPTION[2]: requested_rfc3442_classless_static_routes = 1 DHCP4.OPTION[3]: subnet_mask = 255.255.255.0 DHCP4.OPTION[4]: domain_name_servers = 192.168.1.254 DHCP4.OPTION[5]: ip_address = 192.168.1.182 DHCP4.OPTION[6]: requested_static_routes = 1 DHCP4.OPTION[7]: dhcp_server_identifier = 192.168.1.254 DHCP4.OPTION[8]: requested_time_offset = 1 DHCP4.OPTION[9]: broadcast_address = 192.168.1.255 DHCP4.OPTION[10]: requested_interface_mtu = 1 DHCP4.OPTION[11]: dhcp_rebinding_time = 37800 DHCP4.OPTION[12]: requested_domain_name_servers = 1 DHCP4.OPTION[13]: dhcp_message_type = 5 DHCP4.OPTION[14]: requested_broadcast_address = 1 DHCP4.OPTION[15]: routers = 192.168.1.254 DHCP4.OPTION[16]: dhcp_renewal_time = 21600 DHCP4.OPTION[17]: requested_domain_name = 1 DHCP4.OPTION[18]: domain_name = lan DHCP4.OPTION[19]: requested_routers = 1 DHCP4.OPTION[20]: expiry = 1530783087 DHCP4.OPTION[21]: host_name = 502 DHCP4.OPTION[22]: requested_netbios_scope = 1 DHCP4.OPTION[23]: requested_wpad = 1 DHCP4.OPTION[24]: requested_ms_classless_static_routes = 1 DHCP4.OPTION[25]: requested_netbios_name_servers = 1 DHCP4.OPTION[26]: network_number = 192.168.1.0 DHCP4.OPTION[27]: requested_domain_search = 1 DHCP4.OPTION[28]: next_server = 192.168.1.254 DHCP4.OPTION[29]: requested_ntp_servers = 1 DHCP4.OPTION[30]: requested_host_name = 1 DHCP4.OPTION[31]: dhcp_lease_time = 43200 IP6.ADDRESS[1]: fe80::/64 IP6.GATEWAY: SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE * HP-Print-45-Officejet 6700 Infra 6 2437 MHz 54 Mbit/s 64 ▂▄▆_ -- no Vodafone_2.4G-00579 Infra 11 2462 MHz 54 Mbit/s 44 ▂▄__ WPA1 WPA2 no WIND_2.4G_3C6713 Infra 1 2412 MHz 54 Mbit/s 41 ▂▄__ WPA2 yes * Vodafone_5G-00579 Infra 48 ##### NetworkManager.state ############## [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true ##### NetworkManager.conf ############### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq [ifupdown] managed=false ##### NetworkManager profiles ########### [[/etc/NetworkManager/system-connections/WIND_2.4G_3C6713]] (600 root) [connection] id=WIND_2.4G_3C6713 | type=wifi | permissions=user:gep:; [wifi] mac-address= | mac-address-blacklist= | ssid=WIND_2.4G_3C6713 [ipv4] method=auto [ipv6] method=ignore [[/etc/NetworkManager/system-connections/CUBOT MANITO]] (600 root) [connection] id=CUBOT MANITO | type=wifi | permissions=user:gep:; [wifi] mac-address= | mac-address-blacklist= | ssid=CUBOT MANITO [ipv4] method=auto [ipv6] method=auto ##### Netplan config #################### ##### iw reg get ######################## Region: Europe/Athens (based on set time zone) country 00: DFS-UNSET (2402 - 2472 @ 40), (6, 20), (N/A) (2457 - 2482 @ 20), (6, 20), (N/A), PASSIVE-SCAN (2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN (5170 - 5250 @ 80), (6, 20), (N/A), PASSIVE-SCAN (5250 - 5330 @ 80), (6, 20), (0 ms), DFS, PASSIVE-SCAN (5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN (5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN (57240 - 63720 @ 2160), (N/A, 0), (N/A) ##### iwlist channels ################### lo no frequency information. enp3s0 no frequency information. wlp2s0 32 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Channel 36 : 5.18 GHz Channel 40 : 5.2 GHz Channel 44 : 5.22 GHz Channel 48 : 5.24 GHz Channel 52 : 5.26 GHz Channel 56 : 5.28 GHz Channel 60 : 5.3 GHz Channel 64 : 5.32 GHz Channel 100 : 5.5 GHz Channel 104 : 5.52 GHz Channel 108 : 5.54 GHz Channel 112 : 5.56 GHz Channel 116 : 5.58 GHz Channel 120 : 5.6 GHz Channel 124 : 5.62 GHz Channel 128 : 5.64 GHz Channel 132 : 5.66 GHz Channel 136 : 5.68 GHz Channel 140 : 5.7 GHz Current Frequency:2.412 GHz (Channel 1) ##### iwlist scan ####################### lo Interface doesn't support scanning. enp3s0 Interface doesn't support scanning. Channel occupancy: 3 APs on Frequency:2.412 GHz (Channel 1) 1 APs on Frequency:2.437 GHz (Channel 6) 1 APs on Frequency:2.462 GHz (Channel 11) 1 APs on Frequency:5.24 GHz (Channel 48) 1 APs on Frequency:5.52 GHz (Channel 104) wlp2s0 Scan completed : Cell 01 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=28/70 Signal level=-82 dBm Encryption key:on ESSID:"WIND_2.4G_3C6713" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000004af952d80 Extra: Last beacon: 892ms ago IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK ##### module infos ###################### [iwlmvm] filename: /lib/modules/4.15.0-24-generic/kernel/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko license: GPL author: Copyright(c) 2003- 2015 Intel Corporation description: The new Intel(R) wireless AGN driver for Linux srcversion: 8459DFE0C7E84CD497647AA depends: iwlwifi,mac80211,cfg80211 retpoline: Y intree: Y name: iwlmvm vermagic: 4.15.0-24-generic SMP mod_unload parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool) parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int) parm: tfd_q_hang_detect:TFD queues hang detection (default: true (bool) [mac80211] filename: /lib/modules/4.15.0-24-generic/kernel/net/mac80211/mac80211.ko license: GPL description: IEEE 802.11 subsystem srcversion: 1CEA5CF286EDB289C1D0BF8 depends: cfg80211 retpoline: Y intree: Y name: mac80211 vermagic: 4.15.0-24-generic SMP mod_unload parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool) parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int) parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int) parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int) parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int) parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp) [iwlwifi] filename: /lib/modules/4.15.0-24-generic/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003- 2015 Intel Corporation description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-6.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-6.ucode firmware: iwlwifi-7265D-29.ucode firmware: iwlwifi-7265-17.ucode firmware: iwlwifi-3168-29.ucode firmware: iwlwifi-3160-17.ucode firmware: iwlwifi-7260-17.ucode firmware: iwlwifi-8265-34.ucode firmware: iwlwifi-8000C-34.ucode firmware: iwlwifi-9260-th-b0-jf-b0-34.ucode firmware: iwlwifi-9260-th-a0-jf-a0-34.ucode firmware: iwlwifi-9000-pu-a0-jf-b0-34.ucode firmware: iwlwifi-9000-pu-b0-jf-b0-34.ucode firmware: iwlwifi-9000-pu-a0-jf-a0-34.ucode firmware: iwlwifi-QuQnj-a0-hr-a0-34.ucode firmware: iwlwifi-QuQnj-a0-jf-b0-34.ucode firmware: iwlwifi-QuQnj-f0-hr-a0-34.ucode firmware: iwlwifi-Qu-a0-jf-b0-34.ucode firmware: iwlwifi-Qu-a0-hr-a0-34.ucode srcversion: 6BA065AF04F0DFDB8D91DBF depends: cfg80211 retpoline: Y intree: Y name: iwlwifi vermagic: 4.15.0-24-generic SMP mod_unload parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 4K for other devices 1:4K 2:8K 3:12K (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int) parm: nvm_file:NVM file name (charp) parm: d0i3_disable:disable d0i3 functionality (default: Y) (bool) parm: lar_disable:disable LAR functionality (default: N) (bool) parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) parm: fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool) parm: d0i3_timeout:Timeout to D0i3 entry when idle (ms) (uint) parm: disable_11ac:Disable VHT capabilities (default: false) (bool) [cfg80211] filename: /lib/modules/4.15.0-24-generic/kernel/net/wireless/cfg80211.ko description: wireless configuration support license: GPL author: Johannes Berg srcversion: D5B0789D4C423C81CCFB437 depends: retpoline: Y intree: Y name: cfg80211 vermagic: 4.15.0-24-generic SMP mod_unload parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int) parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp) parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool) ##### module parameters ################# [iwlmvm] init_dbg: N power_scheme: 2 tfd_q_hang_detect: Y [mac80211] beacon_loss_count: 7 ieee80211_default_rc_algo: minstrel_ht max_nullfunc_tries: 2 max_probe_tries: 5 minstrel_vht_only: Y probe_wait_ms: 500 [iwlwifi] 11n_disable: 0 amsdu_size: 0 antenna_coupling: 0 bt_coex_active: Y d0i3_disable: Y d0i3_timeout: 1000 disable_11ac: N fw_monitor: N fw_restart: Y lar_disable: N led_mode: 0 nvm_file: (null) power_level: 0 power_save: N swcrypto: 0 uapsd_disable: 3 [cfg80211] bss_entries_limit: 1000 cfg80211_disable_40mhz_24ghz: N ieee80211_regdom: 00 ##### modprobe options ################## [/etc/modprobe.d/amd64-microcode-blacklist.conf] blacklist microcode [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/blacklist-rare-network.conf] alias net-pf-3 off alias net-pf-6 off alias net-pf-9 off alias net-pf-11 off alias net-pf-12 off alias net-pf-19 off alias net-pf-21 off alias net-pf-36 off [/etc/modprobe.d/intel-microcode-blacklist.conf] blacklist microcode [/etc/modprobe.d/iwlwifi.conf] remove iwlwifi \ (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \ && /sbin/modprobe -r mac80211 [/etc/modprobe.d/mlx4.conf] softdep mlx4_core post: mlx4_e ##### dmesg ############################# [ 4.876852] iwlwifi 0000:02:00.0: base HW address: [ 4.961988] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 4.968596] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.352358] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready (repeated 2 times) [ 5.954559] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 5.974400] r8169 0000:03:00.0 enp3s0: link down (repeated 2 times) [ 5.974469] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 6.057217] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 7.559096] r8169 0000:03:00.0 enp3s0: link up [ 7.559101] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 10.220271] wlp2s0: authenticate with [ 10.228577] wlp2s0: send auth to (try 1/3) [ 10.244563] wlp2s0: authenticated [ 10.248032] wlp2s0: associate with (try 1/3) [ 10.255427] wlp2s0: RX AssocResp from (capab=0x1411 status=0 aid=1) [ 10.259074] wlp2s0: associated [ 10.313188] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 122.609414] wlp2s0: deauthenticating from by local choice (Reason: 3=DEAUTH_LEAVING) [ 135.197636] wlp2s0: authenticate with [ 135.204767] wlp2s0: send auth to (try 1/3) [ 135.214460] wlp2s0: authenticated [ 135.221467] wlp2s0: associate with (try 1/3) [ 135.246807] wlp2s0: RX AssocResp from (capab=0x431 status=0 aid=1) [ 135.257753] wlp2s0: associated [ 149.910589] wlp2s0: deauthenticated from (Reason: 3=DEAUTH_LEAVING) [ 150.563853] wlp2s0: authenticate with [ 150.570772] wlp2s0: send auth to (try 1/3) [ 150.677419] wlp2s0: send auth to (try 2/3) [ 150.783467] wlp2s0: send auth to (try 3/3) [ 150.885378] wlp2s0: authentication with timed out [ 165.106870] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 167.933794] wlp2s0: authenticate with [ 167.940956] wlp2s0: send auth to (try 1/3) [ 167.953005] wlp2s0: authenticated [ 167.953404] wlp2s0: associate with (try 1/3) [ 167.961276] wlp2s0: RX AssocResp from (capab=0x1411 status=0 aid=1) [ 167.963699] wlp2s0: associated [ 168.026648] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready ########## wireless info END ############