暂停后无法连接到WiFi
从暂停状态恢复后，网络管理器会检测到我的WiFi信号，但最终在尝试连接时放弃了。
这些修复不起作用：
$ sudo restart network-manager $ sudo nmcli nm sleep false $ sudo bash -c 'echo SUSPEND_MODULES=\"iwlwifi\" > /etc/pm/config.d/config' 以下是dmesg | tail -30输出 dmesg | tail -30在三种情况下。
当笔记本电脑开启时，WiFi已连接并正常工作。
$ dmesg | tail -30 [ 6.479195] nouveau [ CLK][0000:01:00.0] 0f: core 270-835 MHz memory 2000 MHz [ 6.479339] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 324 MHz [ 6.511984] vga_switcheroo: enabled [ 6.512140] [TTM] Zone kernel: Available graphics memory: 4034782 kiB [ 6.512142] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.512143] [TTM] Initializing pool allocator [ 6.512146] [TTM] Initializing DMA pool allocator [ 6.512154] nouveau [ DRM] VRAM: 2048 MiB [ 6.512155] nouveau [ DRM] GART: 1048576 MiB [ 6.512159] nouveau [ DRM] TMDS table version 2.0 [ 6.512160] nouveau [ DRM] DCB version 4.0 [ 6.512162] nouveau [ DRM] DCB outp 00: 02010300 00000000 [ 6.512164] nouveau [ DRM] DCB conn 00: 00000400 [ 6.513365] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.513366] [drm] No driver support for vblank timestamp query. [ 6.513376] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 6.524228] nouveau [ DRM] MM: using COPY for buffer copies [ 6.534906] nouveau 0000:01:00.0: No connectors reported connected with modes [ 6.534907] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.565439] nouveau [ DRM] allocated 1024x768 fb: 0x80000, bo ffff880252922800 [ 6.565572] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device [ 6.565597] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1 [ 6.867191] init: plymouth-upstart-bridge main process ended, respawning [ 6.871109] init: plymouth-upstart-bridge main process ended, respawning [ 14.819661] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 14.819773] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.230079] audit_printk_skb: 153 callbacks suppressed [ 34.230081] type=1400 audit(1420504569.736:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2606 comm="apparmor_parser" [ 34.230086] type=1400 audit(1420504569.736:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2606 comm="apparmor_parser" [ 34.230384] type=1400 audit(1420504569.736:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2606 comm="apparmor_parser"
从暂停状态恢复后，网络管理器尝试连接时。 WiFi图标闪烁。
$ dmesg | tail -30 [ 5835.278403] wlan0: authenticated [ 5835.281414] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5835.389401] wlan0: associate with 20:aa:4b:71:61:ef (try 2/3) [ 5835.429510] wlan0: associate with 20:aa:4b:71:61:ef (try 3/3) [ 5835.463202] wlan0: association with 20:aa:4b:71:61:ef timed out [ 5835.981063] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 5835.981273] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 5836.451345] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5836.455839] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5836.458444] wlan0: authenticated [ 5836.460831] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5836.568785] wlan0: associate with 20:aa:4b:71:61:ef (try 2/3) [ 5836.571480] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=1 aid=5) [ 5836.571487] wlan0: 20:aa:4b:71:61:ef denied association (code=1) [ 5837.236668] wlan0: deauthenticating from 20:aa:4b:71:61:ef by local choice (reason=3) [ 5838.717178] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5838.721191] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5838.723777] wlan0: authenticated [ 5838.727683] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5838.751269] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=0 aid=5) [ 5838.755381] wlan0: associated [ 5841.893920] wlan0: deauthenticated from 20:aa:4b:71:61:ef (Reason: 2) [ 5841.901569] cfg80211: Calling CRDA to update world regulatory domain [ 5841.906314] cfg80211: World regulatory domain updated: [ 5841.906319] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5841.906323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5841.906326] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5841.906328] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5841.906330] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5841.906333] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
在上述状态之后一分钟左右，它停止尝试连接。 WiFi图标为空。 弹出一个通知，说“已断开连接 – 您现在处于离线状态”。
$ dmesg | tail -30 [ 5932.449208] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5932.452768] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5932.455454] wlan0: authenticated [ 5932.456978] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5932.480497] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=0 aid=5) [ 5932.484791] wlan0: associated [ 5935.611797] wlan0: deauthenticated from 20:aa:4b:71:61:ef (Reason: 2) [ 5935.625479] cfg80211: Calling CRDA to update world regulatory domain [ 5935.630150] cfg80211: World regulatory domain updated: [ 5935.630156] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5935.630159] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5935.630162] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5935.630164] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5935.630167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5935.630169] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5947.144676] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5947.148096] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5947.150573] wlan0: authenticated [ 5947.153610] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5947.177143] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=0 aid=5) [ 5947.181446] wlan0: associated [ 5950.313613] wlan0: deauthenticated from 20:aa:4b:71:61:ef (Reason: 2) [ 5950.323551] cfg80211: Calling CRDA to update world regulatory domain [ 5950.328210] cfg80211: World regulatory domain updated: [ 5950.328215] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5950.328219] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5950.328221] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5950.328224] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5950.328226] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5950.328228] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
来自ubuntuforums ：
在终端中一次键入以下代码行：
sudo touch /etc/pm/sleep.d/wakenet.sh sudo chmod +x /etc/pm/sleep.d/wakenet.sh sudo gedit /etc/pm/sleep.d/wakenet.sh
然后在打开的Gedit窗口中，复制粘贴此文本并按保存。
#!/bin/bash case "$1" in thaw|resume) sudo nmcli nm sleep false sudo pkill -f wpa_supplicant ;; *) ;; esac exit $?
希望有所帮助。
尝试以下命令并重新启动网络管理器，
sudo service dbus restart sudo service network-manager restart
我不知道编程，但我有这个问题，并使其工作我只需要取消选中自动连接到此网络可用时框，并检查允许所有用户连接到此网络框所有这是在网络中连接 – >编辑连接 – >一般
这可能是您的wifi固件的问题。 以下是对可能对您有所帮助的类似问题的答案 ：
从Linux固件git repo下载brcmfmac43602固件
将其复制到/ lib / firmware / brcm
重新启动并享受您的WiFi。
我在MacBook Pro 12,1上试过它，它帮助解决了这个问题（以及WPA2网络的一个问题）