Tag: 更新

更新导致我的系统以文本模式启动

今晚我的系统通知我更新,在执行更新时我被要求重新启动系统。 现在,在启动时,我现在提供了linux控制台,询问我的用户名和密码。 当更新留下相互冲突的nVidia图形驱动程序版本时,如何取回我的图形界面。 我收到了错误 ERROR API mismatch Nvidia Kernel is ver 304.48 but the driver component is 295.40 尝试从控制台启动X时。

为什么安装更新时dpkg会出现“Broken pipe”错误?

以下是dpkg在运行更新时给出的错误消息: sudo apt-get upgrade dpkg: error processing archive /var/cache/apt/archives/linux-firmware_1.143.4_all.deb (–unpack): unable to create `/lib/firmware/brcm/bcm4329-fullmac-4.bin.dpkg-new’ (while processing `./lib/firmware/brcm/bcm4329-fullmac-4.bin’): Permission denied dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/linux-firmware_1.143.4_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) File: ‘/lib/firmware/brcm’ Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 807h/2055d […]

例行更新后,Ubuntu LTS 18.04陷入启动画面

显然,当更新破坏ubuntu时,它再次成为今年的时间 。 今年经过例行更新后,Ubuntu 18.04 LTS陷入了启动画面。 (请注意,我没有升级到LTS 18.04。几个月前我就这么做了。这是一个例行的软件更新。)。 我已经尝试启动到恢复模式,并提供了一个我无法使用的根日志,因为我没有创建root用户。 更新 启动过程最终会在loooooong时间之后继续通过启动屏幕。

我应该为我自己安装的emacs安装更新吗?

昨天,我通过编译源代码从其官方网站安装了最新的Emacs 24.4-1,因为存储库中的那个更旧。 但今天软件更新通知我是否要安装软件更新,包括emacs: Changes for emacs versions: Installed version: 24.4-1 Available version: 45.0ubuntu1 Version 45.0ubuntu1: * Default to emacs24. Version 45.0: * Provide the emacs metapackage (previously produced by emacs23, emacs24, etc.). * Set the initial dependencies to Emacs 23 (for the wheezy release). * Set the initial version higher than any existing emacs binary […]

如何让软件更新程序更新?

我定期运行软件更新程序,但最近它实际上并没有更新我的系统。 我总是说到“这台计算机上的软件是最新的”,但我知道这不是因为“uname -a”产生的: Linux intel-nuc2 3.13.0-49-generic#83-Ubuntu SMP Fri Apr 10 20:11:33 UTC 2015 x86_64 x86_64 x86_64 GNU / Linux ……我相信它现在应该达到3.13.0-52-generic。 我最近做错了什么? 我真的想保持现状。

有更新管理器的问题

我正在尝试更新我的Ubuntu系统,但无法对Update Manager执行任何操作。 它加载了3/4,然后说: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the ‘update-manager’ package and include the following error message: ‘E:The package google-chrome-stable:i386 needs to be reinstalled, but I can’t find an archive for it.’ ubuntu软件中心也不会打开并不断崩溃。 这非常烦人,因为我无法安装或更新任何东西。

我的ubuntu没有正确更新

W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://deb.playonlinux.com precise InRelease: The following signatures couldn’t be verified because the public key is not available: NO_PUBKEY 73F0D6E88E3D6C3A W: Failed to fetch http://deb.playonlinux.com/dists/precise/InRelease The following signatures couldn’t be verified because the public […]

我弄乱了我的本地包装系统,我该如何修理它?

删除PPA后,我的本地软件包系统搞砸了。 它现在要求我运行sudo apt-get -f install来修复依赖项。 已经等了几天才能解决问题(有时由于新的pacakage版本而导致依赖关系发生变化),它毕竟没有发生。 所以我的问题是:出路是什么? 是重新安装系统的唯一方法吗? Note:我知道这不是处理alpha版本问题的地方,但我认为值得对如何解决问题给出一般性答案。 PS:我特定问题的终端输出 $ sudo apt-get -f install Reading package lists… Done Building dependency tree Reading state information… Done Correcting dependencies… Done The following package was automatically installed and is no longer required: libx264-118 Use ‘apt-get autoremove’ to remove them. The following extra packages will be installed: libglib2.0-0 […]

12.04:内核更新 – 停止系统运行级别V兼容性

我最近更新了我的Ubuntu 12.04。 其中一个是内核更新到内核3.2.0-58。 问题是,当更新完成后,它要求重新启动我的计算机,所以我做了。 计算机启动后,大约20秒钟后出现一个带有白色字的黑屏。 随后的消息是Stopping System Runlevel V Compatibility和Stopping Save Kernel Message 。 如何解决这个问题?

如何在启动前更新微码,由于勘误而禁用TSC_Deadline

从今天起,每当我启动Ubuntu时都会遇到此错误消息 ,并且它不会让我启动Ubuntu。 [ 0:000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x52 (or later) … BusyBox v1.22.1 (ubuntu 1:1.22.0-ubuntu2) built-in shell (ash) Enter ‘help’ for a list of built-in commands (initramfs) _ 我现在卡在BusyBox (initramfs) 。 我猜我必须更新微码,我无法弄清楚如何做到这一点,因为我甚至无法启动Ubuntu。 在它要求我输入加密硬盘驱动器的密码短语后出现错误消息。 在此之前它还给我错误消息Error: environment block too small Press any key to continue 。 我不想从头开始重新安装Ubuntu,因为我仍然希望获得加密驱动器上的数据。 我还尝试访问从实时USB启动的加密驱动器,但在尝试访问/安装它时收到错误。 […]