Ubuntu 12.04关于华硕n76vb风扇速度无法正常工作

我紧随其后的是每个传感器

1@ubuntu:~$ sudo sensors-detect perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: ASUSTeK COMPUTER INC. N76VB (laptop) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): yes Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): yes Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): yes Found unknown SMBus adapter 8086:1e22 at 0000:00:1f.3. Sorry, no supported PCI bus adapters found. Next adapter: i915 gmbus ssc (i2c-0) Do you want to scan it? (YES/no/selectively): yes Next adapter: i915 gmbus vga (i2c-1) Do you want to scan it? (YES/no/selectively): yes Client found at address 0x49 Probing for `National Semiconductor LM75'... yeNo Probing for `National Semiconductor LM75A'... No Probing for `Dallas Semiconductor DS75'... sNo Probing for `National Semiconductor LM77'... No Probing for `Analog Devices ADT7410'... No Probing for `Dallas Semiconductor DS1621/DS1631'... No Probing for `Maxim MAX6642'... No Probing for `National Semiconductor LM73'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `NXP/Philips SA56004'... No Probing for `SMSC EMC1023'... No Probing for `SMSC EMC1043'... No Probing for `SMSC EMC1053'... No Probing for `SMSC EMC1063'... No Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus panel (i2c-2) Do you want to scan it? (YES/no/selectively): yes Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpc (i2c-3) Do you want to scan it? (YES/no/selectively): yes Next adapter: i915 gmbus dpb (i2c-4) Do you want to scan it? (YES/no/selectively): yes Next adapter: i915 gmbus dpd (i2c-5) Do you want to scan it? (YES/no/selectively): yes Next adapter: DPDDC-C (i2c-6) Do you want to scan it? (YES/no/selectively): yes Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)yes Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading cpuid... OK 

然后

  sudo service module-init-tools restart 

然后

 sensor 

我得到了这个回应

  acpitz-virtual-0 Adapter: Virtual device temp1: +46.0 C (crit = +108.0 C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +46.0 C (high = +87.0 C, crit = +105.0 C) Core 0: +46.0 C (high = +87.0 C, crit = +105.0 C) Core 1: +45.0 C (high = +87.0 C, crit = +105.0 C) Core 2: +43.0 C (high = +87.0 C, crit = +105.0 C) Core 3: +44.0 C (high = +87.0 C, crit = +105.0 C) asus-isa-0000 Adapter: ISA adapter temp1: +46.0 C 

然后我安装

  fancontrol 

当我试图跑

  sudo pwmconfig This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no fan-capable sensor modules installed 

adn我找不到办法让我的粉丝改变速度

有人能帮我吗

我不知道它是否由于芯片组或配置

  • 华硕n67vb
  • 英特尔®酷睿™i7 3630QM处理器
  • 英特尔®HM76芯片组
  • DDR3 1600 MHz SDRAM 12GB
  • 配备4GB DDR3 VRAM的NVIDIA®GeForce®GT740M