Bumblebee:无法访问辅助GPU – 错误:(EE)

这里有很多类似的错误,但似乎没有一个与我的问题相符。

[ERROR]无法访问辅助GPU – 错误:[XORG](EE)

我有PRIME运行,我可以使用PRIME配置文件在我的英特尔和我的NVIDIA 970M之间成功切换。 我安装了nvidia-375驱动程序(最新版)。

现在唯一不起作用的拼图是大黄蜂。

我的错误:

davidparks21@ghostmint ~ $ vblank_mode=0 optirun -vv /opt/VirtualGL/bin/glxspheres64 -v [ 1011.616264] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf [ 1011.616435] [INFO]Configured driver: nvidia [ 1011.616528] [DEBUG]optirun version 3.2.1 starting... [ 1011.616534] [DEBUG]Active configuration: [ 1011.616535] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf [ 1011.616543] [DEBUG] X display: :8 [ 1011.616547] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-375:/usr/lib32/nvidia-375 [ 1011.616550] [DEBUG] Socket path: /var/run/bumblebee.socket [ 1011.616555] [DEBUG] Accel/display bridge: auto [ 1011.616561] [DEBUG] VGL Compression: proxy [ 1011.616565] [DEBUG] VGLrun extra options: [ 1011.616569] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus [ 1011.616603] [DEBUG]Using auto-detected bridge virtualgl [ 1011.617953] [INFO]Response: No - error: [XORG] (EE) [ 1011.617963] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [ 1011.617966] [DEBUG]Socket closed. [ 1011.617978] [ERROR]Aborting because fallback start is disabled. [ 1011.617984] [DEBUG]Killing all remaining processes. 

我的bumblebee配置文件:

 # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia-375 PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-375:/usr/lib32/nvidia-375 # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-375/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau 

xorg.conf.nvidia

 Section "ServerLayout" Identifier "Layout0" Option "AutoAddDevices" "false" Option "AutoAddGPU" "false" EndSection Section "Device" Identifier "DiscreteNvidia" Driver "nvidia" VendorName "NVIDIA Corporation" # If the X server does not automatically detect your VGA device, # you can manually set it here. # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data # as you see in the commented example. # This Setting may be needed in some platforms with more than one # nvidia card, which may confuse the proprietary driver (eg, # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04. BusID "PCI:01:00:0" # Setting ProbeAllGpus to false prevents the new proprietary driver # instance spawned to try to control the integrated graphics card, # which is already being managed outside bumblebee. # This option doesn't hurt and it is required on platforms running # more than one nvidia graphics card with the proprietary driver. # (Eg Macbook Pro pre-2010 with nVidia 9400M + 9600M GT). # If this option is not set, the new Xorg may blacken the screen and # render it unusable (unless you have some way to run killall Xorg). Option "ProbeAllGpus" "false" Option "NoLogo" "true" Option "UseEDID" "false" Option "UseDisplayDevice" "none" EndSection 

validationPCI总线:

 lspci -vnn | grep '\''[030[02]\]' 00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller]) 01:00.0 3D controller [0302]: NVIDIA Corporation GM204M [GeForce GTX 970M] [10de:13d8] (rev a1) 

https://github.com/Bumblebee-Project/Bumblebee/issues/749

答案终于来了,卸载xserver-xorg-legacy

 sudo apt remove xserver-xorg-legacy 

以下是我用来破解这个的主要资源:

(明白!@#$在这里发生了什么)
http://www.thelinuxrain.com/articles/the-state-of-nvidia-optimus-on-linux

(这将让你90%的方式)
http://nlug.ml1.co.uk/2016/02/an-almost-authoritative-guide-to-nvidia-prime-and-bumblebee/5065

(解决了一堆你可能错过的小陷阱) Bumblebee:无法访问辅助GPU – 错误:[XORG](EE)未检测到任何设备

(官方大黄蜂故障排除页面) https://github.com/Bumblebee-Project/Bumblebee/wiki/Troubleshooting

(最后的活动bug,删除xserver-org-legacy) https://github.com/Bumblebee-Project/Bumblebee/issues/749